How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of steps that are unique to add a second ignition key. This requires a handheld computer, called Tech-2 that is operated by the dealer. Then a new car key and transponder have to be purchased and then programmed to the car.
It is an excellent idea to rotate your keys in order that one doesn't get worn out more quickly than the other. This will also ensure that your keys remain in good condition.
Replacement Case
The new key fobs are not like the old Saab keys. They're equipped with electronic devices that make it difficult to duplicate. This has made car theft considerably more difficult than it was years ago. However, it has also made the replacement of lost keys a more expensive undertaking.
Every owner of a Saab 9-3 must have at minimum two working keys. It is costly to replace a lost or damaged key since it requires replacing the CIM module, and programming the locking cylinders. Dealers charge between $100 and $200 to do this.
There are several ways to get around these costly. Some parts dealers will find the code from an old key (usually the same one that opens the doors and turns off the ignition) and cut a brand new key blade from metal for less than the dealer's cost. The key, however, must be identical to the original in order to function within your car.
You can also change the case yourself by following these steps. You'll need a flathead and a lot of patience. With the screwdriver, slowly pry the plastic apart and separate the emergency keys from the case. After the case is open, remove all electronics and put them back in the new case. Make sure to insert the correct key and badge back inside the case, too.
Replacement Battery
The replacement battery for the Saab 9-3 is an inexpensive part that can be replaced quickly and easily. Cyclone's YouTube video Cyd demonstrates the procedure for replacing the battery for the remote fob in only four steps. This tutorial is compatible with any modern Saab key fob. However, the procedure could differ slightly.
The first step is to find the button that lets off the backup key inside the fob. This button is typically located on the back of your fob just below the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the small hole in this button. This should be enough to unlock the case of the fob so that you can replace the battery.
After the new battery CR1632 is in place then you can reassemble your remote key fob, and then program it to your car. The whole process should not take more than an hour. It's a very easy process that does not require any special equipment.
If you lose a key the process will be a bit more involved, but it can still be done. The dealer has to first verify the VIN of the vehicle before requesting an alternative TWICE module, as well as a key blade that has the correct unique code. After that, they'll have to cut the replacement key and then program it using a brand new tool for programming called MDI.
Replacement Key Fob
The key fob is equipped with an internal battery that is used to lock and unlock your vehicle. Batteries have a limited lifespan and will eventually fail. This is a problem that occurs in all vehicles. The good thing is that you can change the batteries in most key fobs, without having to replace the entire case. You can buy replacement fobs on Amazon that come with all the electronic components already installed, so you'll be able to just pop open the case and replace the batteries that were in the case. It is necessary to remove the emergency key before you can replace the batteries. To accomplish this, simply insert a small screwdriver that is flat into the slot that is in the middle. Use the screwdriver to move around the case until it will split open, making it easy to remove.
When you're ready to replace the keys, make sure you have a spare since this will cut down the total cost by a significant amount. If you have a spare, you can ask the dealer to cut an entirely new key and then program it into your car, which is cheaper than replacing the entire key fob.
It is possible to add a second key to your car in the event that you don't have one, but it will require an extensive amount of research and effort. The cost for adding a second key is around a hundred dollars and also requires programming of the car's computer. saab keys replacement thekeylab.co.uk can do this, but it's an expensive option.
Replacement Ignition
The latest SAAB 9-3 is a more sophisticated alarm system that is based on a key code. This means that if you lose your only functioning key, getting an additional one could be extremely costly since the car needs to have a specific computer module installed, and it must also be programmed to accept an additional key. Most locksmiths cannot do this and even dealers will charge hundred dollars to program the new key!
Dealers will charge you a premium to replace your car's computer (also known as the CIM or SAAB twice) in the event that you lose your only functioning key. Instead, we can reprogram the EEPROM in your current car computer to make it ready for a replacement key, and save you over 50% of what you'll have to pay at a dealership.
If you've been an owner of an 03-11 SAAB 9-3, then you likely know that the ignition key isn't all that durable. If the ignition key you have isn't functioning properly, it is time to look into replacing it. They can become sticky and the buttons have been known to fall off. It's not as difficult as it seems to replace the ignition key. With the right tools, it can be accomplished in a matter of minutes.